Hello Guest it is June 18, 2019, 09:29:05 AM

Author Topic: Strange Mach3 Issue??  (Read 2858 times)

0 Members and 1 Guest are viewing this topic.

Strange Mach3 Issue??
« on: January 26, 2013, 03:43:13 PM »
ok so when i use the text feature in pick wizard to produce this text all is good

G00 G49 G40  G17 G80 G50 G90
G21
M03 S3000
G00 Z2
G00 G90 X7.38Y50.42
F50
G00 Z2
G00 X10.28 Y49.800937
G00 Z0
G01 Z-0.2
G01 X7.670464 Y50.327461
G03 X7.385423 Y50.093895 I7.623397 J50.094185
G01 X7.386641 Y49.106039
G03 X7.628501 Y48.816097 I7.681803 J49.106416
G01 X7.837214 Y48.777759
G00 Z2
G00 X7.38 Y48.872879
G00 Z2
G00 Z2
G00 X7.381827 Y46.436502
G00 Z0
G01 Z-0.2
G01 X7.811839 Y46.336046
G00 Z2
G00 X8.269227 Y46.242405
G00 Z0
G01 Z-0.2
G03 X8.693874 Y46.589448 I8.340161 J46.588897
G01 X8.692801 Y47.296207
G03 X8.370756 Y47.698785 I8.279377 J47.295569
G01 X7.800123 Y47.828096
G03 X7.38029 Y47.492914 I7.724114 J47.492769
G01 X7.38029 Y46.869936
G03 X7.811868 Y46.336046 I7.925983 J46.869675
G01 X8.973869 Y46.087516
G03 X9.404345 Y46.435661 I9.048341 J46.435661
G01 X9.404345 Y47.297773
G00 Z2
G00 X7.380058 Y46.430267
G00 Z2
G00 Z2
G00 X7.642885 Y45.164794
G00 Z0
G01 Z-0.2
G03 X7.393224 Y44.984878 I7.582913 J44.984849
G01 X7.393224 Y44.199268
G03 X7.680788 Y43.842916 I7.757725 J44.19921
G01 X8.242953 Y43.721493
G03 X8.545278 Y43.966137 I8.295646 J43.965499
G01 X8.543393 Y44.694472
G02 X8.793344 Y44.896167 I8.749322 J44.695023
G01 X9.183539 Y44.810762
G02 X9.40507 Y44.537437 I9.123306 J44.535494
G01 X9.410087 Y43.799329
G02 X9.16321 Y43.631274 I9.230287 J43.798111
G00 Z2
G00 X7.380087 Y43.904338
G00 Z2
G00 Z2
G00 X8.591156 Y42.513092
G00 Z0
G01 Z-0.2
G01 X8.591156 Y41.024261
G01 X8.966039 Y40.946744
G03 X9.41145 Y41.313362 I9.041033 J41.309505
G01 X9.404026 Y42.021774
G03 X9.083315 Y42.413158 I8.999708 J42.01754
G01 X7.755289 Y42.693849
G03 X7.386496 Y42.397295 I7.692098 J42.394859
G01 X7.379971 Y41.583816
G03 X7.701871 Y41.205134 I7.760074 J41.580771
G00 Z2
G00 X7.379971 Y41.278388
G00 Z2
G00 Z2
G00 X7.38 Y40.088982
G00 Z0
G01 Z-0.2
G01 X9.468812 Y39.64621
G00 Z2
G00 X9.121595 Y39.716854
G00 Z0
G01 Z-0.2
G02 X9.404026 Y39.292207 I8.935618 J39.286929
G01 X9.407941 Y38.944178
G02 X9.200301 Y38.791551 I9.24934 J38.94238
G00 Z2
G00 X7.38 Y39.166405
G00 Z2
G00 Z2
G00 X7.38 Y35.345655
G00 Z0
G00 Z-0.2
G01 X10.28 Y34.729115
G00 Z2
G00 X8.790531 Y35.045766
G00 Z0
G01 Z-0.2
G01 X10.28 Y32.793655
G00 Z2
G00 X9.020675 Y34.697795
G00 Z0
G01 Z-0.2
G01 X7.38 Y33.409905
G00 Z2
G00 X7.38 Y31.940707
G00 Z0
G00 Z-0.2
G01 X9.41 Y31.521599
G00 Z2
G00 X9.137864 Y31.577772
G00 Z0
G01 Z-0.2
G02 X9.410667 Y31.199757 I9.007277 J31.196074
G01 X9.417308 Y30.47409
G02 X8.969055 Y30.108574 I9.04692 J30.470697
G01 X7.38 Y30.450223
G00 Z2
G00 Z2
G00 X7.754303 Y29.169641
G00 Z0
G01 Z-0.2
G01 X9.115824 Y28.875958
G02 X9.410667 Y28.510761 I9.03706 J28.510732
G01 X9.410667 Y27.808787
G02 X8.93701 Y27.426335 I9.019457 J27.808787
G01 X7.778141 Y27.676199
G02 X7.386264 Y28.158353 I7.882802 J28.161601
G01 X7.382059 Y28.797426
G02 X7.754274 Y29.169641 I7.751838 J28.799862
G00 Z2
G00 X7.379971 Y27.75244
G00 Z2
G00 Z2
G00 X9.409971 Y26.1354
G00 Z0
G01 Z-0.2
G01 X7.73844 Y26.480094
G03 X7.373852 Y26.180611 I7.677163 J26.183018
G01 X7.377361 Y25.73723
G03 X7.717067 Y25.328243 I7.797426 J25.740536
G00 Z2
G00 X8.340654 Y25.206704
G00 Z0
G01 Z-0.2
G01 X7.717067 Y25.328243
G03 X7.383103 Y25.052627 I7.663446 J25.053091
G01 X7.384002 Y24.509544
G03 X7.687516 Y24.136227 I7.766135 J24.510182
G01 X9.410029 Y23.774104
G00 Z2
G00 X7.380029 Y24.194111
G00 Z2
G00 Z2
G00 X7.38 Y20.328208
G00 Z0
G00 Z-0.2
G01 X10.28 Y19.711668
G00 Z2
G00 X8.83 Y20.019938
G00 Z0
G01 Z-0.2
G01 X8.83 Y18.105938
G00 Z2
G00 X10.28 Y17.797668
G00 Z0
G01 Z-0.2
G01 X7.38 Y18.414208
G00 Z2
G00 Z2
G00 X7.754303 Y16.858735
G00 Z0
G01 Z-0.2
G01 X9.115824 Y16.565052
G02 X9.410667 Y16.199855 I9.03706 J16.199826
G01 X9.410667 Y15.497881
G02 X8.93701 Y15.115429 I9.019457 J15.497881
G01 X7.778141 Y15.365293
G02 X7.386264 Y15.847447 I7.882802 J15.850695
G01 X7.382059 Y16.48652
G02 X7.754274 Y16.858735 I7.751838 J16.488956
G00 Z2
G00 X7.379971 Y15.441534
G00 Z2
G00 Z2
G00 X9.409971 Y13.824494
G00 Z0
G01 Z-0.2
G01 X7.73844 Y14.169188
G03 X7.373852 Y13.869705 I7.677163 J13.872112
G01 X7.377361 Y13.426324
G03 X7.717067 Y13.017337 I7.797426 J13.42963
G00 Z2
G00 X8.340654 Y12.895798
G00 Z0
G01 Z-0.2
G01 X7.717067 Y13.017337
G03 X7.383103 Y12.741721 I7.663446 J12.742185
G01 X7.384002 Y12.198638
G03 X7.687516 Y11.825321 I7.766135 J12.199276
G01 X9.410029 Y11.463198
G00 Z2
G00 X7.380029 Y11.883205
G00 Z2
G00 X7.38 Y10.61025
M30



then when i load in the next code to do the rest of the engraving i get big massive circles appear on the tool path window. if i close mach3 and load the same code in (below) no circiles they are gone. WTF???

 (T2 = 3mm)
(t3 = 2mm)
(t4 = 1MM)
(t5 = engrave)


(T2 : 3.00mm)
m6 t2
G43
M3 F150 S3200
G0 X0 Y61.5
G0 Z2
M08
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y55.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y49.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y49.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y43.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y43.5
G1 Z-0.5
G1 X80
G0 Z2

G0 X115 Y43.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y37.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y 37.5
G1 Z-0.5
G1 X80
G0 Z2

G0 X115 Y37.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y31.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y31.5
G1 Z-0.5
G1 X80
G0 Z2

G0 X115 Y31.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y25.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y25.5
G1 Z-0.5
G1 X80
G0 Z2

G0 X115 Y25.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y19.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y19.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y13.5
G1 Z-0.5
G1 X3.34
G0 Z2

G0 X52.53 Y13.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y7.5
G1 Z-0.5
G1 X121.1
G0 Z2

G0 X0 Y1.5
G1 Z-0.5
G1 X121.1
G0 Z2
M09

(warning_label)
G0 Z5
(T3 : 2.00mm)
m5

m6 t3
G43

m3

G0 z2
M08
G0 X85.1 Y44.8
G1 Z-0.3 M3 F150
G1 X111.1
G1 Y43
G1 X85.1
G1 Y41.2
G1 X111.1
G1 Y39.4
G1 X85.1
G1 Y37.6
G1 X111.1
G1 Y35.8
G1 X85.1
G1 Y34
G1 X111.1
G1 Y32.2
G1 X85.1
G1 Y30.4
G1 X111.1
G1 Y28.6
G1 X85.1
G1 Y26.8
G1 X111.1
G1 Y25
G1 X85.1


G0 Z2
G0 X111.1 Y 44.8
G1 Z-0.3
G1 Y25
G1 X85.1
G1 Y44.8
M09
G0 Z5

( T5 : 1.0mm )

( LogoMain )
m5

m6 t4
G43

G17
M3 S3200 f70
G0 X34.0435 Y42.523
G0 z2
M08
G1 F70 Z-0.2
G2 X32.3475 Y42.0986 I-1.6052 J2.8139
G1 X21.8029 Y43.109
G1 X20.1104 Y43.2712
G1 Y40.1586
G1 X21.9218 Y39.9539
G1 X31.5786 Y39.0068
G3 X36.384 Y39.2695 I1.5474 J15.7766
G3 X40.0184 Y42.1997 I-0.7976 J4.7083
G3 X38.3829 Y45.7765 I-4.0441 J0.3132
G3 X33.4738 Y47.9792 I-6.8615 J-8.7203
G1 X13.5252 Y50.0
G1 X13.4444 Y46.7667
G1 X32.1816 Y44.8267
G2 X34.5685 Y43.8163 I0.1587 J-2.9495
G2 X34.0435 Y42.523 I-0.7572 J-0.4459
G0 Z5.0
G0 X34.6393 Y36.8736
G1 Z-0.2
G1 X40.0042 Y36.328
G1 Y28.9318
G2 X27.9786 Y28.9044 I-6.0241 J4.956
G1 X13.4625 Y26.7837
G1 X13.6124 Y30.3577
G1 X26.6961 Y32.2572
G1 X32.1476 Y31.5702
G1 Y30.0748
G3 X34.6393 Y29.6994 I1.4388 J1.0932
G1 Y36.8736
G0 Z5.0
G0 X32.1073 Y35.6522
G1 Z-0.2
G1 Y32.4593
G1 X18.8216 Y33.7931
G1 X18.862 Y36.9455
G1 X32.1073 Y35.6522
G0 Z5.0
G0 X30.2663 Y24.5295
G1  Z-0.2
G2  X40.0 Y18.1828 I-2.3596 J-14.2562
G1 Y12.0
G1 X34.6908 Y12.485
G1 Y18.2241
G3 X24.7267 Y20.2884 I-5.9968 J-3.866
G3 X26.336 Y16.3648 I2.2424 J-1.3721
G1 X19.6994 Y17.0116
G2 X20.8301 Y22.872 I2.8795 J2.4837
G2 X30.2663 Y24.5295 I7.0767 J-12.5987
G0 Z5.0
G0 X29.7898 Y19.9382
G1  Z-0.2
G1  X26.7816 Y20.2504
G1 Y16.229
G1 X32.2331 Y15.6833
G1 Y19.6846
G1 X29.7898 Y19.9382
G00 Z2

G17
M3 S3200 f70
G0 X34.0435 Y42.523
G0 z2
M08
G1 F70 Z-0.4
G2 X32.3475 Y42.0986 I-1.6052 J2.8139
G1 X21.8029 Y43.109
G1 X20.1104 Y43.2712
G1 Y40.1586
G1 X21.9218 Y39.9539
G1 X31.5786 Y39.0068
G3 X36.384 Y39.2695 I1.5474 J15.7766
G3 X40.0184 Y42.1997 I-0.7976 J4.7083
G3 X38.3829 Y45.7765 I-4.0441 J0.3132
G3 X33.4738 Y47.9792 I-6.8615 J-8.7203
G1 X13.5252 Y50.0
G1 X13.4444 Y46.7667
G1 X32.1816 Y44.8267
G2 X34.5685 Y43.8163 I0.1587 J-2.9495
G2 X34.0435 Y42.523 I-0.7572 J-0.4459
G0 Z5.0
G0 X34.6393 Y36.8736
G1 Z-0.4
G1 X40.0042 Y36.328
G1 Y28.9318
G2 X27.9786 Y28.9044 I-6.0241 J4.956
G1 X13.4625 Y26.7837
G1 X13.6124 Y30.3577
G1 X26.6961 Y32.2572
G1 X32.1476 Y31.5702
G1 Y30.0748
G3 X34.6393 Y29.6994 I1.4388 J1.0932
G1 Y36.8736
G0 Z5.0
G0 X32.1073 Y35.6522
G1 Z-0.4
G1 Y32.4593
G1 X18.8216 Y33.7931
G1 X18.862 Y36.9455
G1 X32.1073 Y35.6522
G0 Z5.0
G0 X30.2663 Y24.5295
G1  Z-0.4
G2  X40.0 Y18.1828 I-2.3596 J-14.2562
G1 Y12.0
G1 X34.6908 Y12.485
G1 Y18.2241
G3 X24.7267 Y20.2884 I-5.9968 J-3.866
G3 X26.336 Y16.3648 I2.2424 J-1.3721
G1 X19.6994 Y17.0116
G2 X20.8301 Y22.872 I2.8795 J2.4837
G2 X30.2663 Y24.5295 I7.0767 J-12.5987
G0 Z5.0
G0 X29.7898 Y19.9382
G1  Z-0.4
G1  X26.7816 Y20.2504
G1 Y16.229
G1 X32.2331 Y15.6833
G1 Y19.6846
G1 X29.7898 Y19.9382
G00 Z2

m5 Z15
G49 M9 M20
M30

Offline Hood

*
  •  25,844 25,844
  • Carnoustie, Scotland
    • View Profile
Re: Strange Mach3 Issue??
« Reply #1 on: January 26, 2013, 03:49:05 PM »
Put a G91.1 on the first line of the code.
Hood
Re: Strange Mach3 Issue??
« Reply #2 on: January 26, 2013, 03:49:59 PM »
which one? the second one?

what does g91.1 do?
Re: Strange Mach3 Issue??
« Reply #3 on: January 26, 2013, 03:52:15 PM »
ah the second coding, worked a treat many thanks.

just interested to know what it does now

Offline Hood

*
  •  25,844 25,844
  • Carnoustie, Scotland
    • View Profile
Re: Strange Mach3 Issue??
« Reply #4 on: January 26, 2013, 03:52:45 PM »
It changes the IJ mode to Incremental, the second one is what you want to put it into.
Hood

Offline Hood

*
  •  25,844 25,844
  • Carnoustie, Scotland
    • View Profile
Re: Strange Mach3 Issue??
« Reply #5 on: January 26, 2013, 03:54:44 PM »
It is best to have the IJ mode in all of your code (G90.1 or G91.1) so that no matter which mode Mach is in at the time it will change to the correct IJ mode for that particular code.
Hood