Hello Guest it is March 28, 2024, 08:07:29 AM

Author Topic: mach3 (?) - machine doesn’t finish the cut as it suppos to  (Read 5360 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: mach3 (?) - machine doesn’t finish the cut as it suppos to
« Reply #10 on: January 22, 2013, 04:33:28 PM »
The slower accel values causes the CV to round corners to keep up. The exact stop G61 forces the tool to come to a stop before going to the next point.

You normally want the axis's to accelerate as fast as possible WITHOUT loosing steps. You may have to experiement to see just how fast that can be before loosing steps.

Just a thought, (;-)TP