Hello Guest it is November 15, 2019, 05:45:47 PM

Author Topic: CNC Hot Wire Foam cutter  (Read 3946 times)

0 Members and 1 Guest are viewing this topic.

CNC Hot Wire Foam cutter
« on: December 28, 2012, 07:54:35 AM »
Hi guys

My machines is working, just finishing off with some limit switches.  My website has all the details and a video of it working at http://www.rckeith.co.uk.  Plan to make a flying wing as my next project using the machine I've nick named 'El gizzmo' to produce it.  I've used a lot of recycled wood and parts from an office clear out to make a lot of it and old PC's that were being scrapped.  Electronics is TB6560 from ebay with motors, so far no issues.

Keith
Thanks
Keith

Offline Tweakie.CNC

*
  • *
  •  7,997 7,997
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: CNC Hot Wire Foam cutter
« Reply #1 on: December 28, 2012, 08:17:56 AM »
Excellent work Keith, I look forward to seeing some of the foam cuts.  8)

Tweakie.

(I love the Vulcan - I have a working AAPU [Rover jet engine] removed from one of the vulcan aircraft that were scrapped).
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.