Hello Guest it is March 28, 2024, 11:27:11 AM

Author Topic: Mach3 Turn  (Read 11443 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Mach3 Turn
« Reply #20 on: December 03, 2012, 05:40:26 PM »
Good Grief Charlie Browne ..... what have I started.  :o
RICH

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Turn
« Reply #21 on: December 03, 2012, 05:53:00 PM »
Ok and no funny jokes about green tights please, I will leave the wearing of them to  Errol Flynn :)
Hood
Re: Mach3 Turn
« Reply #22 on: December 08, 2012, 11:58:25 AM »
Too much hassle being a king anyway ;D
Hood

You can't be a pres or a king cause they are too busy to play with Mach and that would make the king very unhappy. Nice thing you did helping this chap out but then you always help people, like a real "Robin Hood" a legal one, lol.
Re: Mach3 Turn
« Reply #23 on: December 16, 2012, 11:56:38 AM »
 "Poor Man's Turret CNC"
With the help of Hood this is the result. Also the tool wear offset has been changed so that
you make the part BIGGER by + tool wear, SMALLER by - tool wear (same as Okuma, Hass, etc.

JR

http://www.youtube.com/watch?v=sMU7Iwl7IeA

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Turn
« Reply #24 on: December 16, 2012, 01:05:21 PM »
Its good it is working as well as you had hoped, it is actually something I may consider doing for the wee lathe I have :)
Hood
Re: Mach3 Turn
« Reply #25 on: December 16, 2012, 01:18:51 PM »
I'll make refinements in the days to come.
It is important to say however that none of this would have been possible without your help and patients.

JR

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Turn
« Reply #26 on: December 16, 2012, 02:13:48 PM »
If not me someone else would have helped, this place is ful;l of people who are willing to help out :)
Hood