Author Topic: Code / tool path is much larger than its supposed to be.  (Read 1920 times)

0 Members and 1 Guest are viewing this topic.

Offline B5

  • Active Member
  • Posts: 13
    • View Profile
Code / tool path is much larger than its supposed to be.
« on: October 27, 2012, 04:25:05 PM »
Hi there, I'm new to all of this but I just got a Zen Toolworks 12"x12" CNC machine.  In Mach3 I've set up all the ports and pins, set soft and hard limits and calibrated the machine.  All is running well however when I import my G-code my design, instead of being 80MM x 80MM or so, it's huge, its probably 2.5 x 2.5 feet.  I am using artCAM to build the code and have a Post processor for millimetres.  Any ideas as to whats going on?
« Last Edit: October 27, 2012, 04:31:35 PM by B5 »

Offline B5

  • Active Member
  • Posts: 13
    • View Profile
Re: Code / tool path is much larger than its supposed to be.
« Reply #1 on: October 27, 2012, 04:32:06 PM »
Oh, I want to try the forums before I do a phone call