Hello Guest it is March 29, 2024, 10:53:19 AM

Author Topic: Spindle drive options "REQUEST"  (Read 7813 times)

0 Members and 1 Guest are viewing this topic.

Re: Spindle drive options "REQUEST"
« Reply #10 on: November 05, 2012, 03:17:03 PM »
Hey TP,
 The 1/2 hp VFD/Inv. Dty. Motor combo is $405
The 400w Servo combo is $1150
Close .... but not real close.

Like I said, I have another use for the VFD and Inv.dty motor if it wants to overheat so I think I'll give it a shot just to verify.

Thanks again,
Russ

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Spindle drive options "REQUEST"
« Reply #11 on: November 06, 2012, 10:05:06 AM »
I think you forgot the resistor bank?. Without it you will start tripping out the VFD. Been there done that one.

(;-) TP
« Last Edit: November 06, 2012, 10:06:37 AM by BR549 »
Re: Spindle drive options "REQUEST"
« Reply #12 on: November 06, 2012, 12:05:16 PM »
It's included ...

GS2 VFD                        $166
.5 HP Inv dty motor         $197
Matching braking resistor    $42.50
Total                           $405.50

I've used this combo before and it stops almost instantly with no tripping, just never attempted to cycle it on and off as quickly as I need to for this project.

Thanks T,
Russ

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Spindle drive options "REQUEST"
« Reply #13 on: November 06, 2012, 05:24:29 PM »
Gotcha, (;-)  But out of curiousity what is the approx cost of the total machine.

OR not any of my business(;-).

(;-) TP
Re: Spindle drive options "REQUEST"
« Reply #14 on: November 07, 2012, 12:02:38 AM »
Retro of an existing machine.
Est. $3500.00 ---> $4000.00
Thanks,
Russ

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Spindle drive options "REQUEST"
« Reply #15 on: November 07, 2012, 08:20:04 AM »
OK makes more sense now(;-)

(;-) TP