Hello Guest it is July 07, 2022, 04:13:34 AM

Author Topic: Nervous Newbie Needs Relay Help  (Read 2338 times)

0 Members and 1 Guest are viewing this topic.

Nervous Newbie Needs Relay Help
« on: October 16, 2012, 03:35:12 PM »
Hi all,

I use Mach3 and a xylotex board to run a Taig.  Works great.

Now I'm getting an old Techno Isel machine retrofitted to run on Gecko drivers.  This setup will be a bit more complicated and will involve having Mach3 provide (2) air lines to this ATC:


Mach3 will also activate an air clamp.  I know I will need Solid-State Relay to zap the pneumatic actuators open.  My question is, where will I get these 3 different 5V+ signals?  Does the LPT cable have 3 open pins?  Also, if the Actuators and SSR's are 24VDC, can I just run them directly off a 24VDC power supply?  Or do I need any sort of additional components?

Any help is greatly appreciated....

Re: Nervous Newbie Needs Relay Help
« Reply #1 on: March 22, 2014, 01:18:02 PM »
Can you send me a copy of the tool changer macro?