Hi,
many thanks to all the answers.
@ger21: Yes i want to move only the 1,44° holding my direction.
@cncalex:
No G91 in the post.
The Fanuc post seems to do the trick for the beginning
The code is correct for one revolution, also the direction. after every revolution it returns to "360°" and starts the next one.
Now with the fanuc post (generic fanuc 4x mill) it works but the code is something like:
A-35555.725
A-35558.579
A-35561.422
I guess the big angles can't be avoided? The problem is that
I haven't mounted the 4th axis yet so I can't test it but in the preview screen of mach3 it still shows a wrong result where small spherical substractions on cylinder are stretched across the surface like Z axis wasn't fast enough.
There are also some lines like:
X96.812 Y.001 A-1170.004 F3.8
And I have no idea why it would slow down to 3.8? The Z axis movement isn't affected.
@ BR549 & CNC Alex
Only when I turn off all the rotation options I see a decent preview screen but high A axis values.
When I turn on the Rollover , I don't see the rotation of the A-Axis but just X Y and Z movements. (I should attach screenshots..)
Max