Hello Guest it is March 29, 2024, 03:18:36 AM

Author Topic: Unsure relays/mach2/3  (Read 3554 times)

0 Members and 1 Guest are viewing this topic.

Offline Bear

*
  •  15 15
    • View Profile
Unsure relays/mach2/3
« on: January 19, 2007, 05:26:08 PM »
Hi all,
am wondering why my machine blows "main" fuses if main power is turned "on" before computer is "on" or for that matter "off".
if i start computer (XP) and then energize Power&BOB things are fine . If I turn computer off first (shutdown Mach ) then
I loose 2 of 3 fuses. ? is I think I have the motor (3ph440) hooked to the relay outputs (M3 to one relay & M4 to another
and works fine ) and maybe I should change the "Hi" to" Low" ?   
Thanks,
 Bear
Re: Unsure relays/mach2/3
« Reply #1 on: January 29, 2007, 08:09:29 AM »
Could you please tell us more about what you have for hardware? Also if you post this in the mach3 forum I think you will get more help :)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com