Those steppers will work, but their performance, particularly in terms of rapid speed, will far well short of stellar. Those motors are VERY high inductance, which, on it's own, severely limits top speed. Further aggravating the problem is the fact that the power supply, at only 60V, is WELL below the ~150V required to get the best performance those motors are capable of. My guess is you'll probably be limited to rapid speeds well under 100 IPM.
Though the drivers allow micro-stepping up to 256X, this is essentially useless. You'll want to use the 8X, or at most 16X setting, to keep your pulse rates reasonable.
Regards,
Ray L.