No progress. I have been at it all last week, but i just cannot get a nice pwm signal. Now i know i `m getting some kind of signal out of the pwm pin, as i do get a trigger to fire the laser. When i disable the pin output, the laser stops working, so i`m at the right pin.
I dont want to stare myself blind on the pwm signal as it is propably working correctly as i do get an output, but it will be nice to know that it does work and i can look further down the line. I dont think my scope can read the signal correctly. Its already more than 15 years old , so it might be faullty. I`m going to try and dowmload pc scope software and see if that doesnt work....i`m becoming obsessive of the pwm signal :-)
Another thing that lead me to believe that the scope is faulty, is the fact that i`m also battling to see a normal radio control pwm signal....i can parcially see it , like only half of it ..never a nice clear all the way across the scope, but just enough to know that its there.. :-(
Thanx for all the feedback and info so far.
A