Hello Guest it is October 23, 2019, 12:11:46 PM

Author Topic: Turret Punches with Mach3  (Read 7518 times)

0 Members and 1 Guest are viewing this topic.

Turret Punches with Mach3
« on: August 27, 2012, 09:55:56 AM »
Here are videos of two of the turret punch press we retrofitted in the last few months.

http://youtu.be/elpTUf00gZc
This is LVD fabri-center, 1988 model, with 33 station turret and 30 ton press.

http://youtu.be/lhOSqPSiClk
This one is LVD Shape Beta, 1994 model, with 15 station turret and 20 ton press.

Zafar

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Turret Punches with Mach3
« Reply #1 on: August 27, 2012, 10:08:26 AM »
Nice work!

Now puch out a few pairs of safety glasses for everyone, ok?  ;)

Thanks for sharing,
Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Hood

*
  •  25,856 25,856
  • Carnoustie, Scotland
    • View Profile
Re: Turret Punches with Mach3
« Reply #2 on: August 28, 2012, 04:38:28 PM »
Nice work :)
Hood
Re: Turret Punches with Mach3
« Reply #3 on: April 30, 2016, 12:30:56 PM »
I have a single station strippit super-ag machine retrofit with mach3 controls. are any special G-codes and M-codes available for nibbling circular pattern or holes on a grid or holes on a line with increment at certain angles. I know the math part but do not know how to code it to script to special m-g-code. Are any such codes available on line. Does Mach4 have any of this built it. like mach4-punch
« Last Edit: April 30, 2016, 12:33:59 PM by bkp-cncinfo »
Re: Turret Punches with Mach3
« Reply #4 on: May 07, 2016, 03:23:46 AM »
I have a single station strippit super-ag machine retrofit with mach3 controls. are any special G-codes and M-codes available for nibbling circular pattern or holes on a grid or holes on a line with increment at certain angles. I know the math part but do not know how to code it to script to special m-g-code. Are any such codes available on line. Does Mach4 have any of this built it. like mach4-punch

This can be done with M-code macros.