Hello Guest it is May 14, 2021, 03:41:48 AM

Author Topic: Motor Tuning  (Read 1717 times)

0 Members and 1 Guest are viewing this topic.

Offline Keith

*
  • *
  •  187 187
    • View Profile
Motor Tuning
« on: August 21, 2012, 04:42:45 PM »
I haven't used my rotary table for a while. I use the A-axis for it. I recently re-installed Mach on a new computer and have a Smoothstepper I'm using as well. Got a lot of the bugs out of things that were inherently Smoothstepper related. Have been using the mill for a while and all has been well. So once I decided to get my rotary table up and running (after tearing it apart), I went to config/motor tuning and it seemed to respond by closing the config drop down but ...no motor tuning screen!?!

I mention having the Smoothstepper because any new problems seemed related to it but this one seems a little left field. All the other config windows come up, only the motor tuning window is a 'no show'.
Any ideas?-Keith

Offline RICH

*
  • *
  •  7,419 7,419
    • View Profile
Re: Motor Tuning
« Reply #1 on: August 21, 2012, 10:00:15 PM »
That never happened to me in any installs or upgrades. Maybe try reinstalling Mach.
RICH

Offline Keith

*
  • *
  •  187 187
    • View Profile
Re: Motor Tuning
« Reply #2 on: August 23, 2012, 11:25:21 AM »
Reinstalled and all is well.
-Keith