Hello Guest it is February 04, 2026, 01:53:24 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Ver. 037 Cut View and Tool Path Backwards with A Rot  (Read 7238 times)

0 Members and 1 Guest are viewing this topic.

Offline Chip

*
  • *
  • 2,055 2,055
  • Gainesville Florida USA
Ver. 037 Cut View and Tool Path Backwards with A Rot
« on: January 16, 2007, 12:01:05 PM »
Hi, Art, Brian and All

In the G-code below A axis view is backwards to actual cut path view when running.

Been this way for a while.

Settings Dia A set to 0.5

Thanks, Chip
Logged

Offline Chip

*
  • *
  • 2,055 2,055
  • Gainesville Florida USA
Re: Ver. 037 Cut View and Tool Path Backwards with A Rot
« Reply #1 on: January 16, 2007, 01:43:04 PM »
Hi, Art, Brian and All

Hear is the view, Cut should follow tooth line.

During feed hold it finds proper position, on restart position is sometimes off.

Thanks, Chip
« Last Edit: January 16, 2007, 01:48:27 PM by afn09556 »
Logged

Offline Chip

*
  • *
  • 2,055 2,055
  • Gainesville Florida USA
Re: Ver. 037 Cut View and Tool Path Backwards with A Rot
« Reply #2 on: January 20, 2007, 11:36:16 PM »
Hi, Art, Brian and All

WOW ! ! Ver .038, 4th Axis View Fix, what a nice job and watching it work WHOO-hooo !.

Thanks, Chip
Logged

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: Ver. 037 Cut View and Tool Path Backwards with A Rot
« Reply #3 on: January 21, 2007, 06:37:38 AM »
See Even if we don't post we are still looking ;)
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Pages: 1   Go Up
« previous next »