quote author=peppermark link=topic=22169.msg154319#msg154319 date=1344222868]
You seem to be using a non standard screenset that when I googled it said it was a Taig screenset. If you have that then possibly you will have a Taig xml on that machine which will have all the correct setting?
If you look on the diagnostics page is there a frequency and a Time in Int showing[
Hood
Was unable to locate a Taig xml file. All indications so far have concluded that the problem is in the configuration of the mach3 to the taig controller I'm using. I'm the last one to realize that. Apparently I'm not the only one with questions??
However, I've been able to discern what settings an information available does not work. Fortunately I was able to come across an older listing of somebody that had a Taig Microproto and was running the Taig MPS Controller with Mach3 on a DOS. Something like that?? And had posted the mach3 setting they were using. It appears to be working satisfactorily for NOW what I wanted to do, for now. I'll see what happens when I shut down & restart the system to see if all the settings have been saved.
From this day forward I will have a lot to do to test & tweet the system. Where and how to enter G-codes, etc. For now that is a bit of an update. Small step but I'm rather happy about how the configurations worked out.
A special thank you to the mach3 forum moderators, sponsors, and members that responded. For now, I need a nap. There will surely be more questions later. Kindest regards. PS