Hello Guest it is March 28, 2024, 06:52:04 PM

Author Topic: MACHsupport Please  (Read 5380 times)

0 Members and 1 Guest are viewing this topic.

MACHsupport Please
« on: July 27, 2012, 12:43:57 PM »
Guys, I just started a new home grown CNC operation running XP system and running (min) ram and lost all my keys..
I can't work it out. My first system worked fine untill I booted up the other PC and now both PC's are (DEMO) mode..WTF.
My other PC worked fine until now. I would like someone from supportMach to reply please. I as far as I know have done nothing wrong apart from forget bits and bytes and so on. Funny I was about to run the EXE to test drivers and (demo) showed up...Help Please

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: MACHsupport Please
« Reply #1 on: July 27, 2012, 01:35:54 PM »
Not really sure what you are asking but if you have lost your licence do a search for Mach1Lic.dat. If you still cant find it send an email to license@machsupport.com  with your details and Scott will likely send you a copy.
Hood
Re: MACHsupport Please
« Reply #2 on: July 27, 2012, 02:09:38 PM »
I've also had mine re emailed in the past. Like Hood says, just send an email.
Re: MACHsupport Please
« Reply #3 on: July 27, 2012, 06:12:19 PM »
thanks Hood..will do, I don't get it I just setup a new operating system and both have no Licence keys. I can't see a conflict but there must be one that I have overlooked. NB: one is XP and the other Windows7. it shouldn't have asked me for licence on system OS already running. Very confused, but many thanks Hood.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: MACHsupport Please
« Reply #4 on: July 27, 2012, 06:13:48 PM »
Still not sure what yopu are meaning.
Are you talking about the windows licence or Mach?
Hood
Re: MACHsupport Please
« Reply #5 on: July 28, 2012, 12:23:32 AM »
MACH3 licence

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: MACHsupport Please
« Reply #6 on: July 28, 2012, 02:24:35 AM »
Mach wont ask you for a licence. If you have your licence place it in the Mach3 folder, if you have lost it email Scott.
Hood
Re: MACHsupport Please
« Reply #7 on: July 28, 2012, 08:18:29 PM »
I found the DAT file hood..now what do I do? MACH3 still says "Demo Version"

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: MACHsupport Please
« Reply #8 on: July 29, 2012, 02:31:48 AM »
Place it in the Mach3 folder on your drive and then re-start Mach if it is already open.
Hood
Re: MACHsupport Please
« Reply #9 on: July 29, 2012, 04:38:54 AM »
yeah that worked..I put the file in the wrong location and MACH3 couldn't find it..Thanks Hood