I got the Haas keypad off a site on the internet that sold replacement parts for Haas machines for a bit cheaper. It was $250.00 for it back when I bought it a year ago. I did a google search and couldn't find the site I bought it off of. They sold other haas parts as well for cheaper than going thru Haas. I was curious if anyone on here has removed the X axis table on one these machines. The ballscrew has .0025 of backlash in it. It's not the thrust bearing so It either needs reballed or refurbished. I just can't figured out how to get it out. I got the 4 bolts out that bolt it to the table from underneath. But it's also doweled in and won't come down off the dowels. Any help would be greatly appreciated. I search all over for a maintenance manual and didn't find anything.