Hello Guest it is March 29, 2024, 06:47:28 AM

Author Topic: Mach Turn 3D Toolpath  (Read 3104 times)

0 Members and 1 Guest are viewing this topic.

Mach Turn 3D Toolpath
« on: July 02, 2012, 06:15:50 PM »
Hello, I am using Mach Turn in a Takisawa Lathe, I cant see in the toolpath screen the 3D screen likes shows the manual.
Can anyone help me with this??

Thanks

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach Turn 3D Toolpath
« Reply #1 on: July 02, 2012, 06:23:38 PM »
Not sure whats in the manual but if you go to Config then Toolpath you can select "Show Lathe Object.
Its sometimes decent but other times not, especially if you have internal toolpaths.
For example heres one with external only then the same part with the internal machining also.
Hood
Re: Mach Turn 3D Toolpath
« Reply #2 on: July 02, 2012, 07:46:58 PM »
himpini,

  Just wondering if you are referring to the isometric view ?
Like this :    http://www.machsupport.com/forum/index.php/topic,5074.0.html

If so, it is gone.

Russ
« Last Edit: July 02, 2012, 07:50:30 PM by Overloaded »