Hello Guest it is March 28, 2024, 03:20:11 PM

Author Topic: CNC machining chuck soft jaw  (Read 9806 times)

0 Members and 1 Guest are viewing this topic.

CNC machining chuck soft jaw
« on: June 23, 2012, 04:01:51 PM »
Hi

With this post I report that at this link there is a program that generate the GCode required to machine soft jaw for scroll chuck. This could be useful for hobbyist that need it but has cheap Chinese chuck.  The program generate the teeth path only.

http://web.tiscali.it/cncweb/


While here for not CNC configuration (this is the Harold Hall web site).

http://homews.co.uk/index.html

Regards


Re: CNC machining chuck soft jaw
« Reply #1 on: January 14, 2015, 02:13:24 PM »
I realise that this thread has been dormant for quite a while. However, my website statistics show that viewers are still arriving at it from the link on this page. In this case a link directly to the soft jaw article will probably help, rather than going via the home page. The article is at http://www.homews.co.uk/page99a.html 

For anyone who is not conversant with my website there are now around 550 metalworking related pages and the book style index for these is athttp://www.homews.co.uk/page463.html

Harold Hall

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: CNC machining chuck soft jaw
« Reply #2 on: January 15, 2015, 04:18:11 AM »
Hi Harold,

Thanks for posting the links to your extremely helpful website and information.

Tweakie.
PEACE