Hello Guest it is March 28, 2024, 07:42:12 PM

Author Topic: JNC-40M configuration?  (Read 25038 times)

0 Members and 1 Guest are viewing this topic.

Re: JNC-40M configuration?
« Reply #20 on: September 03, 2012, 04:28:45 AM »
by the way. machine is moving fine and x,y,z movement is accurate. however I have an issue with the feedrate. I am not able to get it right... when moving at 5000mm/min, with override 100% it shows 1500 value.

If input a G code with f value, it still runs full speed...

any clue how to fix this?
Re: JNC-40M configuration?
« Reply #21 on: September 03, 2012, 12:46:33 PM »
look at feedrates... any clue?
Re: JNC-40M configuration?
« Reply #22 on: September 03, 2012, 04:09:32 PM »
that image seems to show g0 active
what does it do if you type G1 x50 then G1 x200?
John
Re: JNC-40M configuration?
« Reply #23 on: September 03, 2012, 04:29:14 PM »
thanks for the reply. I finally managed to setup all the machine...  ;)
Re: JNC-40M configuration?
« Reply #24 on: September 21, 2012, 01:15:38 AM »
hi everyone
i'm a new owner of a 60100 with a plcx 6045M
Windows can't find the driver on the net !!! i can't go further

can someone send me this driver or let me know wher  i can find it please
my email: fabconv@wanadoo.fr
Re: JNC-40M configuration?
« Reply #25 on: June 14, 2013, 10:18:57 PM »
hi, i'm new in cnc and starting to learn from now on..... i just bought a jnc-40m engrave cnc board one week ago. however i failed to install the jamen usb driver into my new computer asus used windows 8. the device mgner shown the yellow color. i search around the web, couldn't get any inform. for windows 8. May i know anyone have this  latest jnc-40m driver? i couldn't find their official web to download the driver too. if anyone can help me in this issue really appreciated. please e-mail me the driver to alexcfw73@yahoo.co.jp  thanks.
Re: JNC-40M configuration?
« Reply #27 on: June 15, 2013, 01:08:35 AM »
where have you buy this carD and how much please ?
Re: JNC-40M configuration?
« Reply #28 on: June 15, 2013, 01:29:28 AM »
Hi, thanks for ur inform. i bought it from china online IT tech.
Re: JNC-40M configuration?
« Reply #29 on: June 15, 2013, 01:34:30 AM »
HI fabrun, the link i download the software before, i installed successfully. However device manger still shown the yellow color. When update hardware driver again,
windows shown an error that software corrupted.....