Hello Guest it is September 22, 2019, 05:12:14 PM

Author Topic: Servo wiring diagram  (Read 1098 times)

0 Members and 1 Guest are viewing this topic.

Servo wiring diagram
« on: June 04, 2012, 12:01:45 PM »
Hello all!

First of all, I want to tell you this is my first post and don't blame me too much.

My question is related to the electrical part. I have used only industrial PLCs so far and no computer-controlled utilities.

My servo drivers mains power is 220V but the STEP/DIR inputs are having a common of 24VDC and they expect - at the corresponding STEP/DIR terminals. I have no experience but what I know is - computers have 12VDC and 5VDC terminals. Any ideas what is the best solution in this situation?

Once more, my servo drivers are from China so they require minus(-) for control. I saw it's easy to toggle active low/high in Mach3 but don't know how to do it with a 24VDC inputs of the servo system.

I understand the problem may be easy and discussed but I am new, as I said.

Thank in advance.