Hello Guest it is October 18, 2019, 11:00:59 AM

Author Topic: New 4 Axis Milling Screen Set (RaspScreen)  (Read 16892 times)

0 Members and 1 Guest are viewing this topic.

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: New 4 Axis Milling Screen Set (RaspScreen)
« Reply #10 on: January 04, 2009, 08:25:56 PM »
I think you're doing a beautiful job, Graham, it's a very different but great look-  :)

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Chaoticone

*
  • *
  •  5,607 5,607
  • Precision Chaos
    • View Profile
Re: New 4 Axis Milling Screen Set (RaspScreen)
« Reply #11 on: January 04, 2009, 08:29:38 PM »
Yup, Graham is top shelf stock.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: New 4 Axis Milling Screen Set (RaspScreen)
« Reply #12 on: May 27, 2016, 12:26:20 PM »
Hi Graham

Only today I saw his work, I tested and is very beautiful. I wonder if there is any progress, or if you have finished. I would use in my new router.
If not completed, could send me the file and a tutorial so I can continue.
Its screen is without doubt the best I've seen. Thank you.

Ricardo