Hello Guest it is March 28, 2024, 04:48:16 AM

Author Topic: How to run Mach without CNC on  (Read 2545 times)

0 Members and 1 Guest are viewing this topic.

How to run Mach without CNC on
« on: April 01, 2012, 03:26:51 PM »
I would like to import a file and review it on the Mach screen for errors and use the run-time simulator without being connected to the CNC.  My problem right now is the emergency stop won't let me do all I want.

How do I tell the program that I am not connected?
Can I turn emergency stop off?  (Actually I tried that in "pins input", but after apply it kept automatically coming back as active.)

Using screen 2010x.

Steve.
Re: How to run Mach without CNC on
« Reply #1 on: April 01, 2012, 03:32:34 PM »
Just call it a big-dummy moment, I went over the Mach3 2010 Reference Manual and found the reset icon.

All is good.

Steve.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: How to run Mach without CNC on
« Reply #2 on: April 01, 2012, 07:34:27 PM »
Steve, you can email with any questions you may have that are specific to the screenset.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html