Hello Guest it is May 27, 2019, 05:41:18 AM

Author Topic: Anybody tryed that before?  (Read 1768 times)

0 Members and 1 Guest are viewing this topic.

Anybody tryed that before?
« on: March 20, 2012, 07:12:36 AM »
Hi,
I am trying to enbed my PC running Mach3 into my CNC system.
And doing some researches I came across the Zotac NANO-VD01 mini PC.
This is nice and small...

I was jusf wondering if anybody tryed intalling Mach3 on one of these?  Would it have enough power/resources to run Mach3 ?
(I know there is not LPT port on it, but I am using a Eth-SmoothStepper board)

Ta,
RNR

Offline Hood

*
  •  25,828 25,828
  • Carnoustie, Scotland
    • View Profile
Re: Anybody tryed that before?
« Reply #1 on: March 20, 2012, 07:44:13 AM »
I use Via Pico motherboards in my Computurn Lathe and Beaver mill and they work great. 1Gig embedded CPU, 1 Gig DDR and all in a small 100mm x 72mm size :-)
I use the ESS on the lathe and the SS on the mill.
Hood
Re: Anybody tryed that before?
« Reply #2 on: March 20, 2012, 08:00:35 AM »
Thanks for the reply mate!    ;)