Hello Guest it is March 28, 2024, 05:27:59 AM

Author Topic: using "Write/text engrave" wizard in demo version?  (Read 2443 times)

0 Members and 1 Guest are viewing this topic.

using "Write/text engrave" wizard in demo version?
« on: March 10, 2012, 03:27:13 PM »
Hi there,

Are the wizards disabled in the demo version? I am trying to use the "Write/text engrave" but can't get G code out. Snapshot of my screen attached (the "Script" button bottom right is not there)

many thanks

Thomas
Re: using "Write/text engrave" wizard in demo version?
« Reply #1 on: March 10, 2012, 04:05:16 PM »
I mean the "Write" option does not take me back to Mach3, and does not generate any code...

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: using "Write/text engrave" wizard in demo version?
« Reply #2 on: March 10, 2012, 06:43:05 PM »
Choose a Font, and either CW or CCW, and then try it.

You might also want to increase your feedrate to something more than 1mm/min
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: using "Write/text engrave" wizard in demo version?
« Reply #3 on: March 11, 2012, 01:56:09 PM »
Indeed... just needed to set up the font!

Thanks a lot
Thomas