Hello Guest it is August 26, 2019, 01:37:17 AM

Author Topic: changing units on dro from .000 to .0000  (Read 1560 times)

0 Members and 1 Guest are viewing this topic.

changing units on dro from .000 to .0000
« on: March 08, 2012, 07:07:32 PM »
I've searched for 1/2 hour on forums on how to do this... I've seen it before but just can't find it.

My dro's currently read 0.000, I would like to get the tenth to show up so they read 0.0000. How do I get the extra tenth to show up on my screen?

I'm using the 6 axis blue screenset if that matters at all.

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: changing units on dro from .000 to .0000
« Reply #1 on: March 08, 2012, 09:04:22 PM »
You need to change the format of the DRO's in a screen editor, like Screen4 or Machscreen
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: changing units on dro from .000 to .0000
« Reply #2 on: March 08, 2012, 09:08:29 PM »
Ok, thanks. I'll have to tackle that with more experience.