Hello Guest it is May 27, 2019, 05:40:01 AM

Author Topic: Breakout Board  (Read 3438 times)

0 Members and 1 Guest are viewing this topic.

Breakout Board
« on: February 24, 2012, 06:44:14 PM »
Need advise on where to get a replacement breakout board for the YOOCNC X4JKB.  Any & All help will be greatly appreciated.

Offline Tweakie.CNC

*
  • *
  •  7,766 7,766
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Breakout Board
« Reply #1 on: February 25, 2012, 02:52:19 AM »
Although not identical to the one you mentioned CNC4PC do a good range of breakout boards so you should be able to select a comparable replacement. http://www.cnc4pc.com/Store/osc/index.php?cPath=33&osCsid=074e2c480e07efcff985cce3938884a5

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Breakout Board
« Reply #2 on: April 07, 2012, 04:00:49 AM »
I've have exactly same problem as you ith my new CNC3040 from amonstar after one week ... only run 5 hours when Z axis becomes crazy !!!

Idecide to look at everything and after complete cheking i saw that YOOCNC X4JKB card send wrong code to Z axis. So i decide to buy new parrallele card for CNC.

I buy 5 Axis CNC Breakout Board For Stepper Driver Controller. Runs PERFECT !!!

See link below : http://shop.ebay.fr/i.html?LH_TitleDesc=0&_sacat=See-All-Categories&LH_PrefLoc=2&cmd=Blend&_nkw=5+Axis+CNC+Breakout+Board+For+Stepper+Driver+Controller&cmd=Blend

PLUG AND PLAY with all CNC from AMONSTAR ! Nest quality and many option with it !!!

Excuses me for my english (I am french)

D.