Hello Guest it is March 28, 2024, 06:08:12 PM

Author Topic: Head Rises on M3 command  (Read 2108 times)

0 Members and 1 Guest are viewing this topic.

Head Rises on M3 command
« on: February 09, 2012, 12:56:06 AM »
Is there a setting that automatically raises the Z axis anytime the M3 command is given?  If there is where is it and how can I turn it off?

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Head Rises on M3 command
« Reply #1 on: February 09, 2012, 07:03:58 AM »
Sounds like you may have a config issue somewhere, if you attach your xml I will have a look.
Hood

BTW is this plasma? If it is then that may be something to do with a THC you have.

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Head Rises on M3 command
« Reply #2 on: February 09, 2012, 07:18:17 AM »
please don't double post especially when you havn't responded to a reply http://www.machsupport.com/forum/index.php/topic,20779.msg144539.html#msg144539