Hello Guest it is March 19, 2024, 12:51:34 AM

Author Topic: Lathe and Mill on one computer  (Read 2860 times)

0 Members and 1 Guest are viewing this topic.

Lathe and Mill on one computer
« on: January 29, 2012, 01:07:59 PM »
Hi, I have a licensed copy of Mach3 which I set up a while ago to run my lathe.  Now I'm bringing up a mill using the same computer, can I use the same license?  Obviously I don't run the two at the same time! 

Thanks,

John.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Lathe and Mill on one computer
« Reply #1 on: January 29, 2012, 02:04:55 PM »
Yes unless you are making money from the parts you make on the machines. For someone doing this purely as a hobby you can have as many machines and computers with Mach as you like using the one licence. If you make any money at all from your machines then it is asked that you buy a licence for each.
Hood
Re: Lathe and Mill on one computer
« Reply #2 on: January 29, 2012, 03:25:21 PM »
Thanks Hood.  Practically, if the licence file is placed in the Mach3 folder will both Turn and Mill pick it up please?

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Lathe and Mill on one computer
« Reply #3 on: January 29, 2012, 03:31:14 PM »
Yes, mill, turn, plasma all work from the same licence, even older revisions of Mach such as Mach2 can be used, why anyone would want to however I dont know ;D
Hood
Re: Lathe and Mill on one computer
« Reply #4 on: January 29, 2012, 03:32:13 PM »
Excellent, thanks once again for your help!

John.