Hello Guest it is February 25, 2021, 12:46:52 AM

Author Topic: 2 Axis and Mach 3  (Read 1828 times)

0 Members and 1 Guest are viewing this topic.

2 Axis and Mach 3
« on: January 13, 2012, 07:31:55 PM »
 This may be a dumb question but new to this.
 Will Mach 3 work with a 2 Axis only mill without any problems. Thanks Whitey

Offline Tweakie.CNC

*
  • *
  •  8,652 8,652
  • Super Kitty
    • View Profile
Re: 2 Axis and Mach 3
« Reply #1 on: January 14, 2012, 04:14:00 AM »
Hi Whitey,

Yes it will.

I use Mach3 with a laser which is really just 2 axis of operation.

Tweakie.
KEEP SAFE !
Re: 2 Axis and Mach 3
« Reply #2 on: January 14, 2012, 10:25:00 AM »
Thanks. Whitey