Hello Guest it is March 28, 2024, 07:24:16 PM

Author Topic: Question  (Read 2348 times)

0 Members and 1 Guest are viewing this topic.

Question
« on: December 12, 2011, 11:47:48 AM »
Hey guys,

is it normal that if I install Mach3 directly from the site it works correctly; when I transfer the installer using a USB memory the input of the computer to the drives does not work, and therefore the drives doesn't turn on.

Why is that?

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Question
« Reply #1 on: December 12, 2011, 11:52:36 AM »
I don't believe I've ever heard of that one, but I'm sure if anyone has, they'll speak up. Keep watching-

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Re: Question
« Reply #2 on: December 12, 2011, 02:45:46 PM »

Saumur,

I install from USB flash drives since my three machine computers do not connect to the WEB.  No problems.  Are you running the driver test after each new installation?

Regards,
John Champlain
www.picengrave.com