Hello Guest it is December 12, 2024, 12:07:56 PM

Author Topic: Anilam Series 1100 (Step/Dir Help)  (Read 18382 times)

0 Members and 1 Guest are viewing this topic.

Re: Anilam Series 1100 (Step/Dir Help)
« Reply #10 on: December 07, 2011, 06:43:51 PM »
I wish you luck.  I'm still trying to get mine to move.
Re: Anilam Series 1100 (Step/Dir Help)
« Reply #11 on: December 08, 2011, 09:43:12 PM »
I feel I should mention that when I put the board back and wired it as before that the 24VDC was already present at pin 2 so I need to wire ground (not 24VDC) to pin 1 to activate the relays.   pin1 and 2 go to the coils on the relays.