Hello Guest it is March 29, 2024, 03:42:38 AM

Author Topic: Input led  (Read 2666 times)

0 Members and 1 Guest are viewing this topic.

Input led
« on: November 03, 2011, 08:28:50 AM »
Hello.

Trying to put a led that informs the state of the input OEM trig #1, 2 and so on, defined on Inputs signals tab of the mach3 settings.
I have open several screens and honestly I cannot find this info.
Anyone?

Thank you

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Input led
« Reply #1 on: November 03, 2011, 09:13:07 AM »
You could use a Brain to look at the OEMtrigger and have it set a user LED when active. As an example see pic.
Hood
Re: Input led
« Reply #2 on: November 03, 2011, 12:35:53 PM »
Thank you,
I was hopping there was already a built in feature.
That will work also.
Filipe

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Input led
« Reply #3 on: November 03, 2011, 02:33:59 PM »
 Inputs have OEM LEDs and Outputs also but dont think the triggers do.
Hood