Hello Guest it is November 13, 2019, 05:12:48 PM

Author Topic: Digitizing/Probing Question  (Read 1920 times)

0 Members and 1 Guest are viewing this topic.

Digitizing/Probing Question
« on: June 06, 2011, 04:54:05 PM »

I am curious as to if there is a way to use a digitizing probe, while utilizing the 4th, angular axis? Is this something that can be done now?

Thank you

Offline BR549

  •  6,916 6,916
    • View Profile
Re: Digitizing/Probing Question
« Reply #1 on: June 06, 2011, 07:12:40 PM »
YES mach does XYZ and A.

(;-) TP
Re: Digitizing/Probing Question
« Reply #2 on: September 29, 2011, 07:30:07 PM »
I am running Bob Campbells Mach 3 box with a series 1. He suggested I connect the TP100 digitzing probe to the A limit, using port 1 pin 15, but I since I have an A axis that I would like to probe to, is there another point for this input?
If you think you can't do it, you're right.