Hello Guest it is March 28, 2024, 08:06:46 AM

Author Topic: Where to Start  (Read 2414 times)

0 Members and 1 Guest are viewing this topic.

Where to Start
« on: October 06, 2011, 01:36:38 PM »
Hi All
I have just purchased a CNC mill and have started getting my head around this machine and softwear Can anyone help and explain in simple English the procedure for writing text in lazycam and then sending it to mach3

If this machine had an injector pump and injectors and a valve setting all would be fine  ;D ???
Re: Where to Start
« Reply #1 on: October 06, 2011, 01:41:48 PM »
I hear you. I am interested in the replies as well.
I build race motors and race cars, My sausage fingers are struggling on this keyboard.

Mike
Re: Where to Start
« Reply #2 on: October 06, 2011, 05:01:51 PM »
There is an excellent tutorial  on that very subject here.

Plain northern english. :)

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Where to Start
« Reply #3 on: October 06, 2011, 11:29:45 PM »
The manual for LC also covers text and can be found in Members Docs.
There is also a Wizard that comes with Mach that you can use for text.
You can also use text from a saved dxf file and import that file into LC and post code to Mach.
Welcome to the cnc jorney,
RICH