I reinstalled mach on laptop and set config just like the pc in the house and the one on the mill, and it works fine. But the pc running the milling machine still wont run it correctly. All settings have been tripled checked and it just won't run it. If I call sub o1 for all three work offsets it is ok. If I change it to call sub o2 for all three offsets it still is ok. If I change it to any combination of o1 and o2......fail. It come up with some crazy toolpath for the third work offset. I even tried calling the offsets in the reverse order. If I take out cutter comp all is good, however that really does not help me much.