Thanks, I'll innumerate.
1) I can run my spindle, but have no idea how fast is moving. It will only run at at speeds no grater than 200; of course i don't know how fast 200 is . But I can slow it down or speed it up with in the range ( 0- 200)
so when I try to run gcode that has s600 it sends the spindle into limit mode.
2) I have trouble understanding the homing settings; and how they relate to table size. Also the "go to zero" function. How does "0" relate to "home".
I've played with all the homing settings and have a good idea as to how they should work, but can't make all the connections fast enough.
The machine coordinates v/s the home coordinates; and how these relate to the soft limits.
I've watch a few videos on the subject, but its the small details that i am missing.
3) Calibrating the steps to inches moved.
I did the auto function for this. but I know it is not accurate.
4) lazy cam
I need to be walked through the process of importing a file into lazy cam, confirming the specs of my file ( size and shape or correct ) then exporting out the correct gcode for the file.