Hello Guest it is September 16, 2019, 07:10:52 AM

Author Topic: help in ct  (Read 1412 times)

0 Members and 1 Guest are viewing this topic.

help in ct
« on: August 19, 2011, 06:30:58 AM »
I am in Southington CT
I purchased Mach3 and had someone set up and write programs for me.
That person has problems and I can no longer reach him.
I entered my license and have the programs but I know nothing about Mach3.
Is there anyone who could come and get me started.
I use Mach3 with a small router to cut out mat board.  I have a knife setup instead of motors
and it works fine.  We did some simple cut outs before I got the license.
The person who did the programming was suppose to return and prove the programs he had written.
I know the simple ones worked before the license but don't know about the more complicated ones.
I can be reached at 860 621 2881.  That is my machining company number Secondary Company LLC.
The use of Mach3 and the router have nothing to do with my company though.
Paul

Offline RICH

*
  • *
  •  7,358 7,358
    • View Profile
Re: help in ct
« Reply #1 on: August 19, 2011, 06:39:20 AM »
I strongly recommend that you start reading the Mach manuals for the basics of the program . Maybe someone will volunteer to assist you or you can always post in the link below for one on one support.

http://www.machsupport.com/forum/index.php/board,18.0.html

RICH