Hi All !!!,
As a mach3user (an experienced one !) we are facing a problem for the first time !!
while cutting a 2-d contour on a line ,when machine comes to a 90degrees corners (either to the left or rigth) it takes ''shortcuts'' from the corner!(see the attachment please!)
We have checked the ;
Tool path,
Document we try to cut,
Pc's configuration,
Memory optimization,
Upgradeing to the latest version,
But not be able to solve the problem,While looking deeper to the options we came across with LOOK AHEAD option in general logic config.
as we lover the numbers in there ,problem is getting better but we still have the problem!!! and also the error appears randomly,and not follow any pattern.
For example sometimes left turns are problem ,sometimes right turns
we are positive about the error is from the mach3
We are cutting with a 0,78 tool and making a very detailed 2-d cut but if we cannot solve this issue don't know what to do
Please see the attachments and advise !!!!!
Thank you very much in advange for your kind responce and all the best from istanbul.
Baran Özçaylan
Mekano Teknik San. ve Tic. Ltd. Sti.
YB 34 Parsel
Istanbul Deri Organize Yan Sanayi Bolgesi
Tuzla, 34953 Istanbul, Turkey
Phone. +90 216 591 0806
Fax. +90 216 591 0807
Web.
www.mekano.com.tr