Hello Guest it is August 07, 2020, 09:38:55 AM

Author Topic: need help  (Read 1905 times)

0 Members and 1 Guest are viewing this topic.

need help
« on: June 21, 2011, 04:58:53 PM »
I have an old CNC with FANUC 0M controller dose someone knows if it can be used with the software like mach3 in order for me to be using moor M code
then the one i have.
i am using a dnc drape feed because of the small memory.
dror

Offline Hood

*
  •  25,846 25,846
  • Carnoustie, Scotland
    • View Profile
Re: need help
« Reply #1 on: June 21, 2011, 05:06:43 PM »
You would need something like DSPMC or Galil or KFlop/KAnalog to output +-10v for your drives. I have heard people having issues with DSPMC and Fanuc drives so not sure how easy it would be.
Hood
Re: need help
« Reply #2 on: June 21, 2011, 05:13:32 PM »
thanks