Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: drorbo on June 21, 2011, 04:58:53 PM

Title: need help
Post by: drorbo on June 21, 2011, 04:58:53 PM

I have an old CNC with FANUC 0M controller dose someone knows if it can be used with the software like mach3 in order for me to be using moor M code
then the one i have.
i am using a dnc drape feed because of the small memory.
dror

Title: Re: need help
Post by: Hood on June 21, 2011, 05:06:43 PM

You would need something like DSPMC or Galil or KFlop/KAnalog to output +-10v for your drives. I have heard people having issues with DSPMC and Fanuc drives so not sure how easy it would be.
Hood

Title: Re: need help
Post by: drorbo on June 21, 2011, 05:13:32 PM

thanks