Hello Guest it is March 28, 2024, 05:57:15 AM

Author Topic: Help Please With Spindle  (Read 7258 times)

0 Members and 1 Guest are viewing this topic.

Help Please With Spindle
« on: June 15, 2011, 02:27:02 PM »
Can anyone tell me the meaning of the message on mach screen in status ?? it is saying scripter Compile Error in Spindle Speed.mis

if anyone can enlighten me it would be good. I took delivery of my mill which has been modified with belt drives and ball screws when I run the spindle this error is being shown I am new to spindle control via mach and such lost HELP

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Help Please With Spindle
« Reply #1 on: June 15, 2011, 03:17:36 PM »
Can you look in the macro folder for the profile you use and then copy and zip the spindlespeed.m1s macro and attach it to the forum.
Hood
Re: Help Please With Spindle
« Reply #2 on: June 17, 2011, 09:33:20 AM »
Hood
sorry for taking so long been away- looked for that file and found it, not sure how to upload it but will try. I copied the file before zipping and had a look via notepad, now I know you should may not be  doing  this, I dont know how you look at these files officially?  but it has not alot in this that I can see. your thoughts.

Bob

hear we go for the upload
p.s had to rename it bobs

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Help Please With Spindle
« Reply #3 on: June 17, 2011, 12:07:52 PM »
Ok what to do is open Mach then go to Operator menu then  VB Script Editor. In the window that pops up go to file and open then browse to your profiles macro folder and open the spindle speed macro. You will see
rpm = GetRPM()    SetSpinSpeed( rpm )   

It should be on two lines like

rpm = GetRPM()
SetSpinSpeed( rpm )   

Save it and hopefully you will be fine.

Hood
Re: Help Please With Spindle
« Reply #4 on: June 22, 2011, 02:43:29 PM »
Hood thanks for that sorry for delay I tried what you said although the machine is not connected (away being worked on) but the two line you said were all on one line
hope this sorts it will tell by week end as machine comes back
Thanks

Bob

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Help Please With Spindle
« Reply #5 on: June 22, 2011, 02:55:05 PM »
No probs :) Hopefully thats all that the problem is .
Hood
Re: Help Please With Spindle
« Reply #6 on: May 09, 2013, 05:51:22 AM »
Hi,
I have the same problem, but I already edited my spindle speed macro and still get this error.
Anyone could help me please.

Thanks

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Help Please With Spindle
« Reply #7 on: May 09, 2013, 07:00:55 AM »
What version of Mach?
Hood
Re: Help Please With Spindle
« Reply #8 on: May 09, 2013, 07:02:10 AM »
R3.042.020
Re: Help Please With Spindle
« Reply #9 on: May 09, 2013, 07:07:37 AM »
And I have a Laptop with Mach3 without installed drivers, on it doesn't show that error, I have already put the exactly same configs on my PC that control the cnc and still show me this error, also, doesn't show me the complet toolpath draw.