Hello Guest it is March 29, 2024, 01:56:36 AM

Author Topic: cant find "config"logic"  (Read 2755 times)

0 Members and 1 Guest are viewing this topic.

cant find "config"logic"
« on: May 31, 2011, 08:14:20 AM »
Hello all
I am working through the "using mach3turn" literature.

Under the heading "A configuration strategy" ( on page 5-1)
it suggests that we reach the config-logic dialog box to configure
the logic

On the screen that I have there is no subheading called "logic"
in the dialog box called config?

Please tell me if i am missing something or if I maybe have
outdated version??

please help

regards fred evans
 
think of the trees-- use both sides of the computer paper

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: cant find "config"logic"
« Reply #1 on: June 12, 2011, 04:13:26 AM »
Old version, all comes under General Config now.
Hood
Re: cant find "config"logic"
« Reply #2 on: June 12, 2011, 12:24:56 PM »
When you say old versoin do you mean old version of the software or old version of the help file?

regards fred evans
think of the trees-- use both sides of the computer paper

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: cant find "config"logic"
« Reply #3 on: June 12, 2011, 12:41:44 PM »
The older versions of Mach3 had separate State and Logic configurations. Newer versions (last few years) have them combined into one General Configuration window.

Unfortunately, there's only one manual, and it's about 5 years old.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html