Hello Guest it is March 23, 2023, 11:23:24 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: ARROW KEYS DON'T WORK  (Read 2607 times)

0 Members and 1 Guest are viewing this topic.

Offline TOMMYD

*
  • 48 48
    • View Profile
ARROW KEYS DON'T WORK
« on: May 26, 2011, 04:35:31 PM »
My arrow keys will not move my X and Y axis,page up/page down will not move my Z .This all worked fine before.The arrow keys work fine for other applications and xyz work fine with other inputs means.
Logged

Offline RICH

*
  • *
  • 7,428 7,428
    • View Profile
Re: ARROW KEYS DON'T WORK
« Reply #1 on: May 26, 2011, 05:59:29 PM »
Check your configuration>System Hot keys to see what is or is not assigned.
RICH
Logged

Offline Don97045

*
  • 5 5
    • View Profile
Re: ARROW KEYS DON'T WORK
« Reply #2 on: May 26, 2011, 08:09:08 PM »
I'm new at this CNC stuff, and have had the arrow keys not work too, only to find I was trying to use the arrow keys when I was typing in the MDI, and they will not work when the MDI box is open.
Logged
Don

Offline TOMMYD

*
  • 48 48
    • View Profile
Re: ARROW KEYS DON'T WORK
« Reply #3 on: May 27, 2011, 08:49:17 AM »
Thanks,Turns out I had cut off the Jog on/off button by mistake.Alls well.
Logged
Pages: 1   Go Up
« previous next »