Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: TOMMYD on May 26, 2011, 04:35:31 PM
-
My arrow keys will not move my X and Y axis,page up/page down will not move my Z .This all worked fine before.The arrow keys work fine for other applications and xyz work fine with other inputs means.
-
Check your configuration>System Hot keys to see what is or is not assigned.
RICH
-
I'm new at this CNC stuff, and have had the arrow keys not work too, only to find I was trying to use the arrow keys when I was typing in the MDI, and they will not work when the MDI box is open.
-
Thanks,Turns out I had cut off the Jog on/off button by mistake.Alls well.