Hello Guest it is March 28, 2024, 03:42:10 PM

Author Topic: Program to compare profiles and check ports / pins setting  (Read 3539 times)

0 Members and 1 Guest are viewing this topic.

Program to compare profiles and check ports / pins setting
« on: October 29, 2010, 06:54:59 AM »
Hi,

I wrote a new program called MachProfile. That program can compare profile files and shows the differences. It also checks the port / pins settings.
It can be downloaded from http://www.kd-dietz.de.


Klaus

The brain isn't a soap, it doesn't shrink when used.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Program to compare profiles and check ports / pins setting
« Reply #1 on: October 29, 2010, 07:14:14 AM »
That is going to be a very handy programme I think, excellent , thanks for sharing.

Hood
Re: Program to compare profiles and check ports / pins setting
« Reply #2 on: October 29, 2010, 08:31:45 AM »
nice addition to your fine work

only issue for me was the button "Abbrechen" .... I assume it is "Cancel"

Thanks, I like it, very functional !!!
Re: Program to compare profiles and check ports / pins setting
« Reply #3 on: October 30, 2010, 09:10:43 AM »
Hi Ya-Nvr-No

could you please give me the dialog-names where you find "abbrechen"?. Those are system-defined buttons, they should be set by the system to the language.



Klaus
The brain isn't a soap, it doesn't shrink when used.
Re: Program to compare profiles and check ports / pins setting
« Reply #4 on: October 30, 2010, 10:17:58 AM »
It was on the:
Set filter page
Settings ---> Language ---> Dialog page
Actions ---> Check Ports and pins  page
« Last Edit: October 30, 2010, 10:22:38 AM by Ya-Nvr-No »
Re: Program to compare profiles and check ports / pins setting
« Reply #5 on: October 30, 2010, 11:16:41 AM »
Hi Ya-Nvr-No

thank you for your answers. I fixed this issue. Version V1.00.a is ready for download.


Klaus
The brain isn't a soap, it doesn't shrink when used.
Re: Program to compare profiles and check ports / pins setting
« Reply #6 on: May 26, 2011, 03:14:24 PM »
Hello,

I've released MachProfile V2.08 with the following changes and fixes.

Motor / axis page shows now the asigned ports and pins and most of the tuning parameters which can also be printed. "Save" and "Restore" saves and restores the following files: License, Profiles,  Fixtures and the following complete dirs: Addons, Flash, GCode, Plugins, SubRoutins, TurnAddons. Velocity value wasn't shown correct, fixed.

Klaus
The brain isn't a soap, it doesn't shrink when used.