I have tried a couple wizards in Mach 3 one worked great the other, CUT CIRCLE by Kiran, did not. I entered the X, Y center locations, circle diameter, depth, tool diameter and adjusted the feed settings and Z heights. When I clicked on Post G Code, the toolpath display just displayed a large arc on the screen around the center of my X,Y home settings. I was assuming it would show the circle at the X,Y location.
Here is an example of my settings: X & Y set to 4.0, 1.0 for the circle diameter, 0.50 for the depth and 0.125 for the tool diameter.
I have gotten all the Axis' moving in the right directions and the correct distances. I have hit the regen toolpath button before running the program but nothing changes. Any ideas??
Thanks
John