Hello Guest it is January 21, 2020, 02:45:12 AM

Author Topic: First G code to actual part  (Read 1726 times)

0 Members and 1 Guest are viewing this topic.

First G code to actual part
« on: May 14, 2011, 12:29:41 AM »
So things went pretty well. I still have plenty to learn. This was a good start though. The part was orientated in mach facing the other direction so I need to flip the axis. Also locating the block better would help. Eye balling isn't so accurate. 

Offline Tweakie.CNC

*
  • *
  •  8,094 8,094
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: First G code to actual part
« Reply #1 on: May 16, 2011, 12:52:29 PM »
Looks like you are off to a good start Craig.  ;)
Keep posting the pictures and experiences.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.