Hello Guest it is March 28, 2024, 02:59:12 PM

Author Topic: Axis Stops Working  (Read 5987 times)

0 Members and 1 Guest are viewing this topic.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Axis Stops Working
« Reply #10 on: May 13, 2011, 11:18:16 PM »
A lot of G540 users have similar issues, and the reason is almost always due to the parallel port not supplying enough current or voltage. You might want to try a PCI parallel port card.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Axis Stops Working
« Reply #11 on: May 14, 2011, 03:19:37 AM »
Hopefully thats it cured :)
Hood