Hi,

Apologies if this is a dense question, but I'm new to Mach3!

I've got a PC/Relay board attached to my LPT port, which activates relays based on an output on pins 2-9 (turn on pin 9 & a coressponding relay is activated)

I've assigned Output#1 to port 1, pin 8, and toggling active low on/off activates the relay as I want it to.

Is there a way to attach this to a keyboard hotkey? So for example pressing F1 switches output 1 on/off?

Many thanks,
Dave.

Hi Dave,

Yes it's pretty easy to do.
As an example if the spindle control is configured to output#1 the the F5 key will toggle your relay on and off.
Easy enough to change this, just experiment a bit and you will get the hang of it.

Tweakie.

I think you are going to have to create a screen button to run the code to activate the ouput, then assign a hotkey to that button.

Just a thought, (;-) TP